Add and test live video
In Cameras, add the correct profile and the camera’s address, port, stream path and security settings. Verify the real stream before saving. Use the connection details shown by that camera; do not reuse another model’s RTSP path without checking it.
Configure event uploads
For the tested CP PLUS CP-UNC-TT41L3-VMD-Q, configure its ANPRAPI platform address using the address shown by AGNS for that camera’s network. Enable the required plate information, original image and plate cutout. The Host must be reachable from the camera.
Check a new capture
Trigger a new physical plate capture, then check its camera, capture time, full image and plate crop in Detections. If video works but plates do not arrive, check event upload settings and Host reachability separately.
Get model-specific help
Send support the model, firmware, AGNS OS version and a description of the failed step. Do not include passwords, private invitation links or vehicle evidence in a general inquiry.
Setup differs by installed version, plan and hardware. Contact support if your installation differs from these steps.